£246.69
In stock
The WATSON 5lt Semi Flush has opal white glass shades and polished chrome frame.This fitting is a retro-fit LED fitting and comes complete with LED lamps.Matching products are available; type WATSON in the search box at the top of the screen to view the whole range.
| Measurements | H37 x Ø48cm |
|---|---|
| Fixing Plate Dimensions | H3 x Ø10cm |
| Finish | Opal Glass, Polished Chrome |
| Material | Glass, Metal |
| Nett Weight (kg) | 2 kg |
| Symbols | E |
| IP Rating | IP20 |
| Suitable | Indoor |
| Electrical Class | Class I, Earthed |
| Lamp | 5 x 4w LED |
| Brand | DAR Lighting |
| Barcode | 5060228763038 |
| Range | Lighting |
| MPN | RADWAT0550-LED |
You must be logged in to post a review.
Please enter your details below to save your shopping cart
Joel Franklin –
No muy contento
Ziggy1 –
Needed for out of reach shop light switch
Mark & Nicci Walker (verified owner) –
Great value.
Ghuffar U. (verified owner) –
This was exactly what I needed for a small nook. A
Mr. D. Lambert –
This product came in a nice gift box, which was a little odd for an LED bathroom light but certainly not an issue Included in the pack are the light frame, the plastic diffusercover and mounting screws.Installation was fairly simple, just turn off power to the lighting circuit in your fusebox, remove the old fitting remembering to observe and record the wiring layout, and wire this in. It uses a standard screw terminal connector block so should be easy for most anyone to wire, and it does include a grounding strap to the lamp frame which is as it should be. After this you just need to make holes for the mounting screws, which is a bit annoying as there is a foam seal covering them which will need to be punctured in order to mark out your holes. I recommend putting the fitting flush against the ceiling and marking the first hole, then drilling and securing it before marking the other 2 to ensure everything lines up. After drilling and screwing in the other 2 screws and plugs, just put the cover on and twist.This light has a quite simple look when installed, which might come over as cheap to some, but I like it. My cover has some mould marks visible if you look directly at it, but frankly most people wont be doing that I also found the light quite dim, so I would recommend you think carefully about the 10w rating, as although the LEDs will likely last practically forever, you cannot change them out for something brighter without replacing the while fitting. Over time however I have gotten used to the light level and find it quite pleasing. I also like the neutral white temperature for a bathroom as it makes everything look very clean. Worth noting these LEDs give off a fair amount of UV which further enhances that effect.All in all, this is a decent product for the cost, and I would recommend it.
DDK –
looks lovely
Stephen Duffy (verified owner) –
Just what was needed…
Stephen Duffy (verified owner) –
Definitely recommended
Marilyn Bradshaw (verified owner) –
I had a couple of Mr Beams lights at my previous house and was happy to start again, especially as I live in a fairly dark semi rural local very few street lights.This 200L version is very easy to fit, runs off 3 x D cell batteries and provides a welcome pool of light when returning home on a dark night.Battery life was OK and certainly cheaper than getting lights wired in.
robert mcintyre (verified owner) –
Straight forward to install